2026 Enkhuizensloep 780
€54,955 inc VAT Boat name: BRAND NEW TO ORDERBrand: Enkhuizensloep
Model: 780
Year: 2026
Length: 25.59 ft
Fuel: Diesel
Engines: 1
Hull: Fiberglass
Condition: New
With respect for the work of the old carpenters, the battered wooden hull from 1834 was restored. A job that demanded the utmost from our skilled carpenters. The end result was a robust, spacious sloop.
After the hull was made smooth and tight, it was shipped to our polyester supplier elsewhere in the Netherlands. A mold was made there in a professional way. This mould is used for the manufacture of the extremely strong, low-maintenance polyester hull of the Enkhuizen 780.
Available with a convertible top or cabin
The Enkhuizen 780 distinguishes itself from its peers by an unparalleled interior space, equipped with all modern conveniences. Available with a fixed cabin or a traditional convertible top.
Hand-built in Enkhuizen
Characteristic of the Enkhuizensloep is the high level of finish, the use of honest materials, the high safety standard and the personal contact.
All Enkhuizen sloops, including the Enkhuizen 780, are built entirely according to the wishes and personal taste of the customer. At the shipyard in Enkhuizen, we can show you that we go very far in this regard, so that we have been able to realize almost every wish of the customer so far.
An Enkhuizen sloop is therefore not just a sloop, but your sloop.
Library images shown, boats built to order.
Tax status
Measurements
Propulsion
Accommodation
Enquire about this boat
2026 Enkhuizensloep 780 for sale from Boat Showrooms
STANDARD EQUIPMENT
Dimensions
Length overall: 7.80 meters
Beam: 2.60 meters
Draft: 0.60 meters
Air draft: approx. 1.25 m
Weight: approx. 2000 kg
Maximum number of persons: 8
CE category: C
Propulsion
Standard version with VETUS 27 hp 3-cylinder diesel engine
80-liter fuel tank with fuel shut-off valve
Environmentally friendly, water-lubricated propeller shaft system
Equipment
Clinker-built polyester hull
Continuous, heavily ballasted keel
Polyester inner shell
Full-foamed, vibration-reducing engine mount
Stainless steel stern fitting with towing eye
Cable fender with hand-knotted bowsprit
Three sturdy stainless steel bollards
Two stainless steel bow cleats
Four stainless steel Snap-On deck eyes
Stainless steel flagpole and holder
Extra sound insulation in the engine compartment
Instrument panel with ignition lock, tachometer/hour meter, and indicator lights
Maintenance-free starter battery, incl. main switch
Woodwork
Transom-hung rudder with teak cheeks
Teak on the engine cover
Teak trim on the engine cover
Luxury teak helm station
Comfort
Comfortable circular benches at the front and rear.
Storage space at the front, rear, and under the benches.
Water-resistant seat and back cushions with piping.
Sprayhood with stainless steel frame and zip-in rear cover.
Extra support tubes for the sprayhood.
Safety
Electric bilge pump with automatic float switch
Navigation lights
Fire extinguisher
Robust stainless steel heel for extra protection of propeller and rudder
OPTIONAL EQUIPMENT
Propulsion
Standard version with VETUS 33 hp 4-cylinder diesel engine
Standard version with VETUS 52 hp 4-cylinder diesel engine
Standard version with YANMAR 80hp 4-cylinder diesel engine
Equipment
Hydraulic teak helm station with steering wheel
Teak steering wheel 60cm instead of standard 50cm
Fuel gauge
Extra battery with separate charging system
Shore power connection with battery charger and cable
12-volt connection
Waterline
Cabin (instead of sprayhood)
USB or 12 Volt connection per piece
Woodwork
Teak wood on foredeck, aft deck, and steps
Teak trim around the benches
Solid teak table on a pedestal
Solid teak deck capping
Opening instead of sink, hinged teak lid
Comfort
Sun deck with matching cushions
Bluetooth radio incl. 2 matching waterproof speakers
Floor lighting
Refrigerator (30 liters)
Sink with tap (stainless steel) and water tank
2-burner stove
Toilet (dry)
Cover (over the entire sloop)
Bimini top with stainless steel frame
Safety
Stainless steel steering bracket
Entry aid starboard-port side
Cluster cutter
Bow thruster 25 kgf
Bow thruster 35 kgf
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
